HOW TO FIX PSU IN HUMAX IRCI 5400 MODELS

To those that may be interested this is a list of parts that will fix a burnt out power supply unit for a Humax IRCI5400 
(Rev: 1.0 but all should be the same) and will save you a lot of money. 

IT IS DANGERES TO PLAY WITH ANYTHING ELECTRIC IF YOU DO NOT KNOW WHAT YOU ARE DOING 
only attempt this if you have some electronics experience and soldering skills. 

List of parts you will need: = Use 105 degree caps not 85
C09 1000uF 16v
C10 1000uF 16v
C13 1000uF 25v
C14 1000uF 25v
C15 470uF 25v
C16 470uF 25v
C17 220uF 50v
C18 220uF 50v
C19 100uF 50v
C20 100uF 50v
C21 1uF 50v
R21 100 Ohm You can use a 0.25w but I used a 0.6w
ZD3 30v Zener Diode 1.3w

Total cost € 10,- and that is buying just the parts you need and not in bulk or from the cheapest places 


Thanks to Dean and Kampftrinker !

http://www.satcity.nl